{"id":97706,"date":"2022-01-11T03:07:58","date_gmt":"2022-01-11T01:07:58","guid":{"rendered":"https:\/\/gahzly.com\/%d9%83%d9%84-%d9%85%d8%a7-%d8%aa%d8%ad%d8%aa%d8%a7%d8%ac-%d8%a5%d9%84%d9%89-%d9%85%d8%b9%d8%b1%d9%81%d8%aa%d9%87-%d8%b9%d9%86-%d9%83%d8%b4%d8%a7%d9%81%d8%a7%d8%aa-%d8%a7%d9%84%d8%a5%d8%b6%d8%a7%d8%a1\/"},"modified":"2023-12-20T13:27:30","modified_gmt":"2023-12-20T11:27:30","slug":"lighting-everything-you-need-to-know-about-lighting","status":"publish","type":"post","link":"https:\/\/gahzly.com\/en\/\u0645\u0642\u0627\u0644\/lighting-everything-you-need-to-know-about-lighting\/","title":{"rendered":"\u00a0Lighting : Everything you need to know about Lighting"},"content":{"rendered":"

\u00a0Lighting : Everything you need to know about <\/span><\/span>Lighting <\/span><\/span><\/h1>\n

\"\u00a0Flashlights:<\/p>\n

Introduction to the electric searchlight:<\/span><\/span><\/p>\n

Flashlight:<\/span><\/span><\/p>\n

The first electrical measuring instrument to detect the presence of an electrical charge,<\/span><\/span><\/p>\n

Charge is detected by the movement of the body due to the electrostatic force according to Coulomb’s law.<\/span><\/span><\/p>\n

The amount of charge on a body is proportional to its potential.<\/span><\/span><\/p>\n

Charge buildup\u00a0 to detect with an electroscope requires hundreds or thousands of volts,<\/span><\/span><\/p>\n

Electromicroscopes are therefore used with high voltage sources such as static electricity and electrostatic machines.<\/span><\/span><\/p>\n

Use an electric flashlight to demonstrate electrostatic induction.<\/span><\/span><\/p>\n

The electroscope can only give a rough indication of the amount of charge;<\/span><\/span><\/p>\n

An instrument that measures electric charge quantitatively is called an electrometer.<\/span><\/span><\/p>\n

The first electric searchlight was a coaxial needle (called a versorium).<\/span><\/span><\/p>\n

Invented by British physician William Gilbert around 1600, it is still used in physics education to prove the principles of static electricity.<\/span><\/span><\/p>\n

A type of electroscope is also used in quartz fiber radiation dosimeter.<\/span><\/span><\/p>\n

The torch usually consists of a pair of thin gold leaves suspended from an electrical conductor.<\/span><\/span><\/p>\n

A transparent box that is isolated from its external surroundings so that what is inside it is not affected by what is around it.<\/span><\/span><\/p>\n

Its working principle is based on repulsion and attraction of charges. This is done by bringing a charged body close to the column connected to the searchlight device.<\/span><\/span><\/p>\n

Therefore, the electrons move on the body to which they are connected to the detector device, reaching the two thin gold leaves.<\/span><\/span><\/p>\n

To protect the gold leaves from air currents, they are placed in a glass bottle, usually opened at the bottom and mounted on a conductive base.<\/span><\/span><\/p>\n

There are often metal plates or foil strips in the bottle surrounding the gold leaf on both sides,<\/span><\/span><\/p>\n

The charges are distributed equally on the two papers, which results in the presence of the same charges on both papers.<\/span><\/span><\/p>\n

Modern electromicroscopes typically use balls made of plastic to test the presence of charge on an object.<\/span><\/span><\/p>\n

The electric searchlight is considered one of the most important inventions through which several things were revealed in scientific studies.<\/span><\/span><\/p>\n

What is the story of the invention of the electric searchlight?<\/span><\/span><\/p>\n

Jean-Antoine Nollet was a cleric and physicist.<\/span><\/span><\/p>\n

In 1748 AD,<\/span><\/span><\/p>\n

Nollet invented one of the first electron meters, the electroscope, and determined the existence of an electric charge using the principle of attraction and repulsion.<\/span><\/span><\/p>\n

Nollet later wrote a theory of electric attraction and repulsion based on the existence of a continuous flow of electrical matter between charged bodies and became the first professor of experimental physics at the University of Paris.<\/span><\/span><\/p>\n

Scientists continued to make many improvements to the searchlight,<\/span><\/span><\/p>\n

Because it only indicated the presence of the shipment and not its type, after that they modified it so that they could know the type of shipment as well.<\/span><\/span><\/p>\n

Later, a graduated scale was added to determine the amount of charge. In the late nineteenth century, a detector was developed to study radioactivity.<\/span><\/span><\/p>\n

Samuel C. Lind, born in 1879 AD, invented the first electric searchlight for radium measurements, called the Lind searchlight.<\/span><\/span><\/p>\n

\u00a0Floodlights: Everything you need to know about Floodlights<\/span><\/span><\/h2>\n

Installation of lighting fixtures<\/span><\/span><\/p>\n

One of the most cost-effective and quickest upgrades you can do to the appearance of your home is through<\/span><\/span><\/p>\n

Easy and simple lighting upgrades, floodlight replacements and electrical upgrades that will make your home brighter and more inviting.<\/span><\/span><\/p>\n

Most floodlights come with instructions that will help you assemble and install the light, which I recommend you read the manufacturer’s instructions before you start replacing the light fixture.<\/span><\/span><\/p>\n

This step-by-step lighting installation will help you replace most downlights including sconce lights, pendant lighting, track lighting, ceiling light, wall light and more.<\/span><\/span><\/p>\n

The following is a simple, easy, step-by-step procedure that will help you install the lighting fixture safely and correctly.<\/span><\/span><\/p>\n

Most floodlights and light boxes are universal and standard,<\/span><\/span><\/p>\n

So the lighting installation procedure you will learn here will help you be able to install most spotlights.<\/span><\/span><\/p>\n

To make installing the light easier, it’s a good idea to take a photo of the old light’s wiring or even a video, especially when there is more than one three-conductor wire inside the box.<\/span><\/span><\/p>\n

\"\"When installing a light fixture, the black\/red wire is hot, the white wire is neutral and the bare wire is grounded.<\/span><\/span><\/p>\n

Before doing anything, turn off the power and check the dual circuit with a non-contact voltage tester to ensure there is no power to the light.<\/span><\/span><\/p>\n

Always turn off the power to the light you want to install or remove from the circuit breaker panel and if not the electrical panel<\/span><\/span><\/p>\n

If your light is rated or you’re not sure what circuit is for the light you’re replacing, turn off the main breaker which will shut off power to your entire home.<\/span><\/span><\/p>\n

Tools you need for light installation:<\/span><\/span><\/p>\n

[Screwdrivers (4 in 1, or Philips, flat, Roberson), non-contact circuit tester, pliers, wire strippers, wire cutters, safety glasses<\/span><\/span><\/p>\n

, ladder, flashlight, wire connectors (wire nuts)]<\/span><\/span><\/p>\n

alert:<\/span><\/span><\/p>\n

When working with electricity, caution and caution are the first priority and be sure to follow the electrical code and building code requirements,<\/span><\/span><\/p>\n

And first check with your local electrical code authority if you are allowed to do this electrical job if you do not contact a licensed electrician.<\/span><\/span><\/p>\n

If you’re not sure about your home’s wiring, hire a certified electrician. And always disconnect the power before doing anything.<\/span><\/span><\/p>\n

To install floodlights and get free electrical quotes, contact our Edmonton electricians<\/span><\/span><\/p>\n

.\"\"<\/p>\n

How to replace headlights<\/span><\/span><\/p>\n

1. Start by reading the manufacturer’s instructions and assembling the new light as best you can<\/span><\/span><\/p>\n

2. Turn off the power from the electrical panel by flipping the breaker that powers the light fixture you are replacing<\/span><\/span><\/p>\n

3. Make sure the power is off by turning the lamp off and on<\/span><\/span><\/p>\n

4. Remove old headlights by removing the light bulbs, and the lamp shade<\/span><\/span><\/p>\n

This is when you will see the current lighting wires and connections and use a non-contact voltage tester to ensure there is no power.<\/span><\/span><\/p>\n

5. Take a picture of the existing wires to make sure you remember how to connect the wires and the new wires the same way.<\/span><\/span><\/p>\n

This is especially useful when there is more than one three-conductor wire in the box<\/span><\/span><\/p>\n

6. After ensuring that there is no power, disconnect the wires and remove the old headlights<\/span><\/span><\/p>\n

7. Install the mounting bracket and hardware for the new lighting fixture on the ceiling light box<\/span><\/span><\/p>\n

8. Connect the light wires to the wires in the box with the same colors (black to black, white to white, green to green or bare)<\/span><\/span><\/p>\n

Pull each wire nut to make sure the connection is tight, then push the wires into the box.<\/span><\/span><\/p>\n

9. Install the new light fixture on the mounting bracket, and install the new bulbs and lamp shade.<\/span><\/span><\/p>\n

(note:<\/span><\/span><\/p>\n

Be sure to check the light bulb rating and install bulbs with the maximum wattage at or below what is indicated on the light bulb)<\/span><\/span><\/p>\n

10. Turn on the electricity by flipping the breaker and enjoy the new lighting<\/span><\/span><\/p>\n

.<\/span><\/span>\"\"<\/p>\n

How to install a lighting device<\/span><\/span><\/p>\n

Here are simple and easy techniques to install spotlights correctly and safely:<\/span><\/span><\/p>\n

1. Start by reading the light manufacturer’s instructions on how to assemble and install the light fixture<\/span><\/span><\/p>\n

2. First start by turning off the power at the breaker panel<\/span><\/span><\/p>\n

3. Use a non-contact voltage tester to ensure there is no power<\/span><\/span><\/p>\n

4. Make sure the light box is securely fastened and supported properly if it is not secured and supported<\/span><\/span><\/p>\n

5. Install the mounting bracket for the new light fixture and install it correctly<\/span><\/span><\/p>\n

6. Connect the white wire of the light box to the white wire of the floodlights (neutral to neutral)<\/span><\/span><\/p>\n

Twist the ends of the wires together clockwise and screw the wire nut onto the twisted wires<\/span><\/span><\/p>\n

, and do the same for the black wires and the ground wires (always twist like-colored wires together clockwise and then twist the wire connector over them)<\/span><\/span><\/p>\n

7. Then mount the light fixture on the light mounting bracket<\/span><\/span><\/p>\n

8. Screw the light bulb into the light fixture and install the lamp shade<\/span><\/span><\/p>\n

9. Turn on the power at the breaker panel and then turn on the light switch<\/span><\/span><\/p>\n

\"\"How to replace a pull string light<\/span><\/span><\/p>\n

This may be the easiest light to replace, as the pull string light does not have an exposed metal body<\/span><\/span><\/p>\n

, so you’ll only need to connect the black and white wires to the light. Below are the installation instructions.<\/span><\/span><\/p>\n

1. You will first need to disconnect the power from the breaker box<\/span><\/span><\/p>\n

2. Test the circuit with a non-contact voltage tester to confirm that the power is off<\/span><\/span><\/p>\n

3. Remove the old light by unscrewing the bulb and then unscrewing the wires<\/span><\/span><\/p>\n

Then start installing the new lamp as follows:<\/span><\/span><\/p>\n

4. Connect the white striped wire to the white screw, then wrap it around the screw clockwise and tighten the screw<\/span><\/span><\/p>\n

5. Connect the black striped wire to the gold screw, then wrap it around the screw clockwise and tighten the screw<\/span><\/span><\/p>\n

6. Screw the two screws that secure the light to the box<\/span><\/span><\/p>\n

7. Turn on the power and pull the string light ready for use<\/span><\/span><\/p>\n

alert:<\/span><\/span><\/p>\n

When working with electricity, caution and caution are the first priority and be sure to follow the electrical code and building code requirements<\/span><\/span><\/p>\n

If you do not contact a licensed electrician or if you are not sure of the wiring in your home, first check with your local electrical code authority if you are allowed to do this electrical job.<\/span><\/span><\/p>\n

Hire a certified electrician. For all kinds of headlights,<\/span><\/span><\/p>\n

Call our Edmonton electricians or check our website,<\/span><\/span><\/p>\n

We also offer 24\/7 electrical service and repairs to make sure your family is safe, and your business is running<\/span><\/span><\/p>\n

\"\"Safety instructions on how to install the lighting device<\/span><\/span><\/p>\n

1. First disconnect the power from the breaker box [Electricity comes from the street into your home through your electric meter<\/span><\/span><\/p>\n

And from the electric meter it goes to the main breaker panel to the main breaker and then from there to the branch circuit breakers and finally to your home’s outlets, lights and appliances] so<\/span><\/span><\/p>\n

Each lamp will be connected to a branch circuit breaker and you will need to turn off the light circuit breaker.<\/span><\/span><\/p>\n

2. If the electrical panel is not labeled and you are not sure what circuit is for the light you are going to install<\/span><\/span><\/p>\n

, turn off the main breaker which will shut off power to the entire house.<\/span><\/span><\/p>\n

3. Turning off the power from the switch does not mean there is no power to the light and always turning off the power form breaker box<\/span><\/span><\/p>\n

4. Double check the light with a non-contact voltage tester to make sure there is no power<\/span><\/span><\/p>\n

5. The hot wire is for the light (black) carrying current, the white wire is neutral and the bare\/green wire is ground<\/span><\/span><\/p>\n

6. Most lamps have exposed metal parts,<\/span><\/span><\/p>\n

It must be grounded by connecting the green screw on the mounting bracket to ground to make it safe and meet electrical code installation requirements.<\/span><\/span><\/p>\n

7. Make sure the light fixture is grounded and that you have three conductors (black, white, bare) inside the box<\/span><\/span><\/p>\n

8. Make sure you follow the polarity and connect the wires with the same polarity (hot to hot, neutral to neutral, ground to ground)<\/span><\/span><\/p>\n

9. Anytime you install a heavy lighting fixture, make sure the electrical box is secure and supported to support the weight of the spotlights<\/span><\/span><\/p>\n

10. Some national and local electrical codes require that a licensed electrician install a lighting fixture.<\/span><\/span><\/p>\n

Check with your local electrical code authority if you are allowed to install a lamp and if you need an electrical permit to install a lamp.<\/span><\/span><\/p>\n

11. Make sure you install light bulbs with the same or lower wattage they are rated for.<\/span><\/span><\/p>\n

(If you install bulbs with a higher wattage than they are rated for, you may cause a fire.)<\/span><\/span><\/p>\n

12. Always follow electrical code requirements and manufacturer instructions<\/span><\/span><\/p>\n

alert:<\/span><\/span><\/p>\n

When working with electricity, always first turn off the power to the breaker box and be sure to follow electrical code requirements<\/span><\/span><\/p>\n

If you do not call a licensed electrician or if you are not sure of the wiring in your home, first check with your local electrical code authority if you are allowed to do this electrical task.<\/span><\/span><\/p>\n

Hire a certified electrician.<\/span><\/span><\/p>\n

For all types of floodlights, call our Edmonton electricians or check our website<\/span><\/span><\/p>\n

We also provide electrical services 24 hours a day, 7 days a week.<\/span><\/span><\/p>\n

Frequently asked questions about floodlights<\/span><\/span><\/p>\n

Can I install a light in my home?<\/span><\/span><\/p>\n

It is best to check your local electrical safety authority and electrical code to see if you are allowed to install a lamp.<\/span><\/span><\/p>\n

Can I install a light on a 3-way switch?<\/span><\/span><\/p>\n

Yes, the light can be installed on 3-way switch, 4-way switch, single-pole switch, dimmer switch and smart switch.<\/span><\/span><\/p>\n

Can I install a light without a ground?<\/span><\/span><\/p>\n

Installing a light or any electrical appliances and equipment without ground is not permitted by the electrical code and is not safe.<\/span><\/span><\/p>\n

Can I install a lamp with aluminum wire?<\/span><\/span><\/p>\n

Yes, this can be done, but you will need to use an anti-oxidant wire connecting the copper wires to the aluminum wires to prevent oxidation between the copper and aluminum wires.<\/span><\/span><\/p>\n

Why are lighting options and the lighting industry changing?<\/span><\/span><\/p>\n

The main factors driving changes in the lighting industry are energy efficiency, lighting colors, the approach towards reducing energy consumption, and colorful and stylish lights.<\/span><\/span><\/p>\n

What should you consider when choosing a light bulb?<\/span><\/span><\/p>\n

Longevity, energy efficiency, environmental friendliness, wattage and voltage of the lamp should match the maximum wattage and voltage of the lighting base<\/span><\/span><\/p>\n

.\"\"<\/p>\n

Where will lighting standards go in the future?<\/span><\/span><\/p>\n

Given the rising cost of energy, carbon tariffs and global warming, the future of lighting is energy efficiency and environmentally friendly lighting technologies.<\/span><\/span><\/p>\n

What are some different types of lamps (bulbs)?<\/span><\/span><\/p>\n

T12, T8, T5, marine, display case, reflective, bright,<\/span><\/span><\/p>\n

B, BA, CA, F, G, S, M, T-shape, black light, infrared, silver, left-and-thread, signal, fault, etc.<\/span><\/span><\/p>\n

What is cavitation?<\/span><\/span><\/p>\n

Lumen is the unit of light, brighter lights are higher lumens, dim lights are lower lumens.<\/span><\/span><\/p>\n

What are the different light bulb base sockets?<\/span><\/span><\/p>\n

Common lamp bases are standard, medium and small screw-based sockets, incandescent bases, etc.<\/span><\/span><\/p>\n

What does CFL mean?<\/span><\/span><\/p>\n

It stands for compact fluorescent lamp and contains mercury.<\/span><\/span><\/p>\n

What are the most durable light bulbs?<\/span><\/span><\/p>\n

LED, then CFL, then incandescent bulbs.<\/span><\/span><\/p>\n

How do I dispose of CFLs?<\/span><\/span><\/p>\n

CFLs contain mercury, so we recommend recycling them at special CFL disposal and recycling facilities.<\/span><\/span><\/p>\n

If I’m building a new home when should I plan for lighting?<\/span><\/span><\/p>\n

It is recommended that you design your lighting with your architectural plans and lighting should be integrated and considered from the design and start of the project.<\/span><\/span><\/p>\n

What should I consider about lighting options and design?<\/span><\/span><\/p>\n

Energy efficiency, appearance, longevity and environmentally friendly.<\/span><\/span><\/p>\n

How much should I budget for lighting?<\/span><\/span><\/p>\n

This depends on the types of lights you choose in terms of quality, appearance, efficiency and style.<\/span><\/span><\/p>\n

What is LED retrofitting?<\/span><\/span><\/p>\n

It rewires and restructures traditional bulbs to update them to take LED bulbs and LED fixtures. This is a cost-effective way to switch from traditional lighting to energy efficient lighting.<\/span><\/span><\/p>\n

Can I use lights on my floors and stairs?<\/span><\/span><\/p>\n

Yes, there are specific lights that are made to be used on floors, stairs, landscaping, and more.<\/span><\/span><\/p>\n

Can I use the lights in a hot sauna or stem sauna?<\/span><\/span><\/p>\n

Yes, you can as long as you purchase bulbs designed for saunas, rated for your sauna’s temperature and need special wiring per electrical code requirements.<\/span><\/span><\/p>\n

Where can I use LED lights?<\/span><\/span><\/p>\n

You can use LED lights anywhere you are allowed to use traditional bulbs as long as they are rated for that location<\/span><\/span><\/p>\n

For example, if you are using LED lights for the outdoors, they must be rated for outdoor use. Before using and installing LED lights, check the manufacturer’s instructions.<\/span><\/span><\/p>\n

What is Light’s IP?<\/span><\/span><\/p>\n

It is the protection level for lights to be used in humidity and outdoor locations.<\/span><\/span><\/p>\n

What are the functions of decorative light versus architectural light?<\/span><\/span><\/p>\n

Decorative lights are designed for both appearance and light, but architectural lights are designed mostly for light and less for appearance.<\/span><\/span><\/p>\n

What is smart lighting?<\/span><\/span><\/p>\n

They are WiFi connected floodlights that are able to connect to smart devices that will enable you to control them online and from a remote control.<\/span><\/span><\/p>\n

Smart lights are the main future of smart home lighting.<\/span><\/span><\/p>\n

Can I control the lighting from my smartphone?<\/span><\/span><\/p>\n

All smart lighting can be controlled from all smart devices and from remote locations.<\/span><\/span><\/p>\n

What can I control remotely when my home is a smart home?<\/span><\/span><\/p>\n

Almost everything in a smart home can be controlled wirelessly and remotely including (lighting, cooling, heating, security, audio, video, etc.).<\/span><\/span><\/p>\n

What are motion sensors?<\/span><\/span><\/p>\n

Motion sensors are wall or ceiling sensors that control lights based on movement,<\/span><\/span><\/p>\n

When someone moves, the sensor turns on the lights and if there is no movement for a certain period of time (1,5, 15, 20, 30…) minutes it will turn on. Turn on the lights.<\/span><\/span><\/p>\n

What is a motion sensor light?<\/span><\/span><\/p>\n

It is a light with a built-in motion sensor<\/span><\/span><\/p>\n

.\"\"<\/p>\n

What are occupancy sensors?<\/span><\/span><\/p>\n

Occupancy sensors are wall or ceiling sensors that control lights based on motion and light<\/span><\/span><\/p>\n

When someone moves or it gets dark, the sensor turns on the lights and if there is no movement<\/span><\/span><\/p>\n

\/or there has been light for a certain period of time (1, 3, 5, 15, 20, 30, …) minutes the lights will be turned off.<\/span><\/span><\/p>\n

What is an occupancy sensor light?<\/span><\/span><\/p>\n

It is a light with a built-in occupancy sensor.<\/span><\/span><\/p>\n

What are sound sensors?<\/span><\/span><\/p>\n

Sound sensors are wall or ceiling sensors that control lights based on sound<\/span><\/span><\/p>\n

When there is sound, the sensor turns on the lights and if there is no sound for a certain period of time (1, 3,5, 15, 20, 30,…) minutes, the lights will turn off.<\/span><\/span><\/p>\n

What is sound sensor light?<\/span><\/span><\/p>\n

It is a light with a built-in sound sensor.<\/span><\/span><\/p>\n

What are photovoltaic cells?<\/span><\/span><\/p>\n

Photocells are sensors that control lights based on light and are mostly installed outside to turn lights on at night (dark) and turn lights off during daytime (light).<\/span><\/span><\/p>\n

What is photocell light?<\/span><\/span><\/p>\n

It is a light with a photocell built into it.<\/span><\/span><\/p>\n

What are the advantages of pot lights compared to regular lights?<\/span><\/span><\/p>\n

Pot lights look sleeker and provide more consistent and even lighting.<\/span><\/span><\/p>\n

What are the advantages of LED lights?<\/span><\/span><\/p>\n

Diversity of colors, longer lasting, lower electricity consumption, more lamination.<\/span><\/span><\/p>\n

What should you consider when putting away pot lights? [1 – Quantity of light needed, 2 lumens per column lamp, 3 sizes of pot lights, 4 ceiling heights]<\/span><\/span><\/p>\n

What are the differences between 3000K, 4000K, 5000K, LED lights?<\/span><\/span><\/p>\n

3000 Kelvin or less gives you yellow light called warm white light.<\/span><\/span><\/p>\n

4000K between these two is called daylight and warm white light.<\/span><\/span><\/p>\n

5000 K or more is very bright and is called crystal white and blue white light.<\/span><\/span><\/p>\n

What is the distance between the floodlights and pot lights? \/ How high can I install pot lights?<\/span><\/span><\/p>\n

It all depends on the amount of lights you need, the recess of each vertical lamp, the size of the pot lights, and the height of the ceilings that can be spaced (3, 4, 5, 6, 7, 8) feet apart.<\/span><\/span><\/p>\n

What are the advantages of LED to MR16?<\/span><\/span><\/p>\n

LEDs are more energy efficient, brighter, last longer, and come with a variety of colors.<\/span><\/span><\/p>\n

What are the advantages of LED to GU10?<\/span><\/span><\/p>\n

LEDs are more energy efficient, brighter, last longer, and come with a variety of colors.<\/span><\/span><\/p>\n

What is the lifespan of LED lights?<\/span><\/span><\/p>\n

LED lights last for (20,000 to 60,000) hours of use depending on quality and workmanship.<\/span><\/span><\/p>\n

What type of pot lights can I install in the attic? \/ What type of pot lights can I install in direct contact with insulation?<\/span><\/span><\/p>\n

When you install pot lights that are in direct contact with insulation, they must be IC rated pot lights.<\/span><\/span><\/p>\n

Can I install a dimmer on LED pot lights?<\/span><\/span><\/p>\n

Yes, you can do that, as long as the dimmer is rated for the LEDs.<\/span><\/span><\/p>\n

What is the best way to adjust pot lights?<\/span><\/span><\/p>\n

Use a laser to create a perfect line for your pot lights to give you a perfect line for mounting a pot light.<\/span><\/span><\/p>\n

IC: insulation contact<\/span><\/span><\/p>\n

 <\/p>\n

IP: Ingress protection<\/span><\/span><\/p>\n

CFL: compact fluorescent lamp<\/span><\/span><\/p>\n

WiFi: Wireless precision<\/span><\/span><\/p>\n

 <\/p>\n

Floodlights: Everything you need to know about Floodlights<\/span><\/span><\/p>\n

\"gif\"Try\u00a0<\/span><\/span>Prepare me<\/span><\/span><\/a>\u00a0for a fun shopping trip<\/span><\/span><\/p>\n

<\/span><\/span>We are pleased that you visit our social media pages, where we publish exclusive offers on our website.<\/span><\/span><\/h4>\n

Our Facebook page\u00a0<\/span><\/span>Here<\/span><\/span><\/a>.<\/span><\/span><\/p>\n

Our Twitter account\u00a0<\/span><\/span>Here<\/span><\/span><\/a>.<\/span><\/span><\/p>\n

\n
\n
<\/div>\n<\/div>\n<\/div>\n","protected":false},"excerpt":{"rendered":"

\u00a0Lighting : Everything you need to know about Lighting Introduction to the electric searchlight: Flashlight: The first electrical measuring instrument to detect the presence of an electrical charge, Charge is detected by the movement of the body due to the electrostatic force according to Coulomb’s law. The amount of charge on a body is proportional […]<\/p>\n","protected":false},"author":3,"featured_media":51760,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[7375,7415],"tags":[7804,7813,7782,10203,7803,7796,7808,7814,14181,14182,14183,8177,14185,14165,14186,8109],"class_list":["post-97706","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-articles","category-lightning-and-accessories","tag-and-accessories","tag-classified","tag-electric","tag-headlights-en","tag-light","tag-lighting","tag-lightning-en","tag-non","tag--en"],"featured_image_src":{"landsacpe":["https:\/\/gahzly.com\/wp-content\/uploads\/2022\/01\/\u0643\u0634\u0627\u0641\u0627\u062a-\u0627\u0644\u0625\u0636\u0627\u0621\u0629-\u0643\u0644-\u0645\u0627-\u062a\u062d\u062a\u0627\u062c-\u0625\u0644\u0649-\u0645\u0639\u0631\u0641\u062a\u0647-\u0639\u0646-\u0627\u0644\u0643\u0634\u0627\u0641-\u0627\u0644\u0643\u0647\u0631\u0628\u0627\u0626\u064a-1-1025x445.jpg",1025,445,true],"list":["https:\/\/gahzly.com\/wp-content\/uploads\/2022\/01\/\u0643\u0634\u0627\u0641\u0627\u062a-\u0627\u0644\u0625\u0636\u0627\u0621\u0629-\u0643\u0644-\u0645\u0627-\u062a\u062d\u062a\u0627\u062c-\u0625\u0644\u0649-\u0645\u0639\u0631\u0641\u062a\u0647-\u0639\u0646-\u0627\u0644\u0643\u0634\u0627\u0641-\u0627\u0644\u0643\u0647\u0631\u0628\u0627\u0626\u064a-1-463x348.jpg",463,348,true],"medium":["https:\/\/gahzly.com\/wp-content\/uploads\/2022\/01\/\u0643\u0634\u0627\u0641\u0627\u062a-\u0627\u0644\u0625\u0636\u0627\u0621\u0629-\u0643\u0644-\u0645\u0627-\u062a\u062d\u062a\u0627\u062c-\u0625\u0644\u0649-\u0645\u0639\u0631\u0641\u062a\u0647-\u0639\u0646-\u0627\u0644\u0643\u0634\u0627\u0641-\u0627\u0644\u0643\u0647\u0631\u0628\u0627\u0626\u064a-1-300x183.jpg",300,183,true],"full":["https:\/\/gahzly.com\/wp-content\/uploads\/2022\/01\/-\u0627\u0644\u0625\u0636\u0627\u0621\u0629-\u0643\u0644-\u0645\u0627-\u062a\u062d\u062a\u0627\u062c-\u0625\u0644\u0649-\u0645\u0639\u0631\u0641\u062a\u0647-\u0639\u0646-\u0627\u0644\u0643\u0634\u0627\u0641-\u0627\u0644\u0643\u0647\u0631\u0628\u0627\u0626\u064a-1-jpg.webp",1025,625,false]},"jetpack_featured_media_url":"https:\/\/gahzly.com\/wp-content\/uploads\/2022\/01\/-\u0627\u0644\u0625\u0636\u0627\u0621\u0629-\u0643\u0644-\u0645\u0627-\u062a\u062d\u062a\u0627\u062c-\u0625\u0644\u0649-\u0645\u0639\u0631\u0641\u062a\u0647-\u0639\u0646-\u0627\u0644\u0643\u0634\u0627\u0641-\u0627\u0644\u0643\u0647\u0631\u0628\u0627\u0626\u064a-1-jpg.webp","_links":{"self":[{"href":"https:\/\/gahzly.com\/en\/wp-json\/wp\/v2\/posts\/97706","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/gahzly.com\/en\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/gahzly.com\/en\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/gahzly.com\/en\/wp-json\/wp\/v2\/users\/3"}],"replies":[{"embeddable":true,"href":"https:\/\/gahzly.com\/en\/wp-json\/wp\/v2\/comments?post=97706"}],"version-history":[{"count":0,"href":"https:\/\/gahzly.com\/en\/wp-json\/wp\/v2\/posts\/97706\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/gahzly.com\/en\/wp-json\/wp\/v2\/media\/51760"}],"wp:attachment":[{"href":"https:\/\/gahzly.com\/en\/wp-json\/wp\/v2\/media?parent=97706"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/gahzly.com\/en\/wp-json\/wp\/v2\/categories?post=97706"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/gahzly.com\/en\/wp-json\/wp\/v2\/tags?post=97706"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}