Have you experienced this accident before? Especially when you are in a hurry, because you want to go somewhere.

Sometimes, solving a house door lock takes a lot of time. It sure is annoying!

What often happens when a door lock is not stuck is to force it to turn or pull it out.

In fact, this method can damage the hatch lock making it easier for thieves to act.

So why is the door lock so hard to open? What is the solution if that happens? Let’s read the explanation together.

How to easily open a jammed door lock

1. Use anti-rust oil or cleaner

If the door lock is stuck due to rust, you can use the simplest method, that is, provide anti-rust liquid or oil.

The first step, open the cover on the home key. Then apply anti-rust oil or cleaner.

2. Use a rubber mallet

The next way to open a stuck door is to try to push it in with a rubber mallet.

In the meantime, to pull out the key, you can do it manually or with pliers.

The two motions are intended to make the inside of the door lock loose while pulling the door handle.

If it is loose, perform a pulling and inserting motion until the jammed door lock can be released.

3. Use a paperclip

This little thing turns out to have an unusual function, when you are faced with a situation where the bedroom door is jammed and cannot be opened.

The trick is, first you have to insert the end of the paperclip into the door hole or handle.

After inserting the tip of the paperclip, hit it slowly and forcefully, until the door can be opened again.

4. A wire hanger as an alternative

You can also use a wire hanger, as a way to open a stuck door easily.

But keep in mind that these steps will work when used on this type of  latch lock .

First step, make a wire clothes hanger into a hook. Next, thread the wire into the gap between the frame and the door edge.

After that, pull the hanger to the open position, then the wooden door lock will open.

5. Fix with a screwdriver and a screw

Steps using a screwdriver and screws can be tried on how to fix a door lock that is stuck, and can’t be removed.

This method is as follows:

a. Remove the screw inside the lock on the door handle.

B. Replace the old key with a new one, the same size as the previous one.

c. Install the new lock by inserting the iron rod into the handle hole position, then attach the screws to the lock body.

Dr.. Apply the wrench knob again by screwing, in the hole position already available.

6. Turn the knob and lock together

To open the door, turn the handle and close it at the same time.

However, you need to do this very carefully, because this method runs the risk of breaking the handle or key.

Well, this is how to open a stuck door with a number of steps. Hope these tips are helpful to you!

6 ways to open a stuck door without damaging it. A paperclip can be used