Electricity is the element that powers our homes and makes our daily lives easier. However, when problems occur in our electrical system at home, they can lead to unwanted electrical shocks. Electrical shocks in the home are accidents that can happen for a variety of reasons and can pose risks to our safety and well-being. In this article, we will explore the common causes of household electrical shocks, to better understand how they occur and how we can take action to prevent them. Follow us with this exclusive information, thanks to which we can reduce the risks associated with electricity in our home environment.

What is meant by a jolt of electricity?

An electroshock is an electrical shock or oscillation. These shivers can be more or less dangerous depending on various factors such as the intensity of the current, the duration of contact, and the path the current takes through the electrical circuit. It is important to note that even seemingly minor electrical surges can be a cause for concern, as they can lead to internal complications or house fires. Therefore, it is necessary to take all necessary precautions to prevent these oscillations and seek help from electrical specialists.

Causes of electricity shock in the home

It is necessary to pay close attention to the quality of electrical connections and wires in our home in order to prevent electric shock. Old or damaged electrical cords can pose serious risks. In addition, it is important to ensure that the size of the wires corresponds to the electrical load required to operate our home appliances. Appliances such as water pumps and air conditioners can draw high current, requiring adequate electrical infrastructure to support them. By regularly checking the condition of our electrical connections and hiring qualified professionals to perform any necessary repairs or upgrades, we can significantly reduce the risk of electrical shock in the home. Electrical safety must remain a priority to ensure our well-being and the well-being of our loved ones in our local environment.

Here is an analysis of 7 causes of electrical shocks in the home:

Poor electrical insulation

Poor electrical insulation can be one of the causes of electrical shocks in the home. When electrical cables are poorly insulated or damaged, it can result in direct contact between electrical conductors and conductive surfaces. This creates a risk of electric shock if a person touches these surfaces. Bare cables, exposed wires, or broken outlets can also compromise electrical insulation and greatly increase the risk of an electrical shock.

Overload on an electrical circuit

One of the causes of electricity jerks in a home is an overload, which occurs when electrical demand exceeds the capacity of the circuit. This can be caused by plugging too many devices into a single outlet or by using a device that requires more power than the circuit can provide. This can result in risks of fire, equipment damage, and sudden power outages. It is important to avoid overloading circuits by distributing the electrical load wisely and using appropriate circuits for high-power devices.

Electrical shock occurs due to poor grounding

When the grounding system is inadequate or does not respect standards, it causes electrical shocks. Electrical current can accumulate in appliances or conductive surfaces, increasing the risk of electric shock in the home. Proper grounding is essential to provide a safe and efficient path to dissipate unwanted currents and provide protection against electrical shock.

Neutral wire problems

A problem with the neutral wire can be the cause of an electrical shock in the home. When the neutral wire encounters problems such as bad contact or corrosion, it can damage the safe return of power supply. This can cause current to build up in electrical appliances and conductive surfaces, increasing the risk of an electrical shock.

It is necessary to check all electrical connections and installations regularly, especially those on the electrical panel where the circuit breakers are located. It is important to ensure that the electrical wires are connected correctly and that there are no signs of old or corroded wires. If any problems are found, it is recommended to contact a qualified electrician to make the necessary repairs and ensure the safe operation of the home’s electrical system.

Use of defective electrical appliances

When devices contain defects such as damaged power cables, exposed wires, or faulty outlets, they can create a risk of direct contact with electrical current. This can cause shock and electric shock. Therefore, before operating electrical appliances, it is important to regularly check their condition, repair or replace them if a problem occurs, and take precautions when using them to avoid any risk of electric shock.

The presence of water or moisture

The presence of water or moisture poses a significant risk of electrical shock in the home. Since water is a conductor of electricity, any contact between electrical appliances, outlets or wires and water can result in electrical shock. Situations such as direct contact with water, water leakage, or use of electrical appliances near water greatly increase the risk of exposure to electrical fluctuation.

Changes in electrical potential

Voltage changes provided by the electrical supply company can cause electrical shocks in the home. Overvoltage, undervoltage and voltage fluctuations are common problems. Overvoltages exceed the nominal value, undervoltages are below this value, and voltage fluctuations are rapid and unpredictable changes. The power company is responsible for providing constant voltage in homes, but if you encounter recurring problems, contact them to investigate and take action. In the meantime, you can use protective devices such as voltage regulators or surge protectors to reduce the risk of electric shock from voltage changes.

Causes of lamps shaking in the house

If your light bulbs in your home are flickering, this may indicate an underlying electrical problem. Several reasons may be responsible for this phenomenon. Incorrect or defective electrical connections can cause bulbs to flicker. In addition, voltage fluctuations can cause jitter in the lighting. In either case, it is important to have a qualified electrician evaluate and fix the problem. They will be able to determine the specific cause of the vibration and take the necessary steps to ensure stable and safe lighting in your home.

Danger of electrical shock at home

The dangers of the electrical shock that occurs in Abetel exceed the dangers to which humans are exposed. Here are some additional dangers associated with electrical shocks in the home:

• –  A jolt of electricity can damage electrical devices connected at the time of the accident. A power surge or short circuit can cause electronics to malfunction, damage internal circuits, or even destroy devices entirely.
• –  They can also cause sparks, increasing the risk of fire. Bare wires, faulty connections or electrical overloads can cause overheating and sparks that combust flammable materials at any moment.
• –  An arc flash caused by electrical shock can damage electrical wires, switches, outlets, and other electrical system components. This can require costly repairs and potentially affect the entire structure of the home.

• –  Electrical shocks may cause disruption of sensitive equipment such as computer systems, servers, communications equipment, and sensitive electronic devices. Voltage fluctuations or power surges can cause malfunction or permanent loss of this device.
• -In  some cases, a power surge can lead to  a power outage  in the home. Short circuits or overloads can cause localized power outages, which may require an electrician to restore power.
• –  It is important to take appropriate electrical safety measures to prevent the risk of electrical shock at home. This includes checking wires and cables regularly, using outlets that meet safety standards, avoiding overloading electrical circuits, installing protective devices such as  RCDs  , and using qualified professionals to install and maintain your home’s electrical system.

8 tips to avoid electrical shocks at home

• Regularly check for electrical faults in the home and repair them immediately.
• Make sure to perform regular maintenance on your electrical system to prevent anything bad from happening.
• Use appliances with low power consumption to reduce electrical risks.
• Make sure you have proper and tight electrical connections as this is one of the main causes.
• Avoid electrical overloads by judiciously distributing devices on different circuits.
• Avoid using electrical appliances near water sources or in humid environments.
• Regularly check the condition of electrical wires and cables and replace them if damaged.
• Use a qualified electrician to install or repair complex electrical circuits.

It is very important to understand  the causes of electrical shocks in the home , including taking preventive measures such as regularly checking wires and connections, using safety-compliant appliances, avoiding electrical overloads, and hiring qualified electricians for installation and repair work. By being informed and following good practices, we can significantly reduce the risk of electrical shock at home, and create a safer environment for yourself and your family. Let us not forget that vigilance and prevention are the key to maintaining our electrical safety and feeling peace of mind at home.