Main parameters

To get started, briefly consider the most important criteria for choosing a refrigerator for the home. So, the first thing you should decide before purchasing is:

1. Equipment dimensions . There are one-, two-, three-, four-, five- or even six-room models. As a rule, each manufacturer has its own product sizes, however, they are all close to the standards and can differ by no more than 5-10 cm. To correctly choose the dimensions of the refrigerator, you first need to determine where it will be installed, after which measure this place with a tape measure and, on the basis of the measurements obtained, select the appropriate option for height, width and depth. Two-room units are the most popular, as they have a similar freezer and refrigerator. They are followed by side-by-side, single-room, and then multi-room.
2. Camera locations . Everyone is accustomed to the presence of the freezer at the bottom, however, there are models with an upper location of the freezer. It happens without it at all, so when choosing, pay attention to this moment. We also advise you to consider the ratio of rooms, it happens that the freezer is almost the same as the refrigerator. This is very convenient for those who want to pick up a device with a large freezer.
3. Usable size . To choose a refrigerator displacement, you need to know one simple thing – for two people a 180-liter device will be enough. For a family of 3 people, you can buy a model with a capacity of 250 liters, and if you have a large family (5-6 people), we recommend choosing equipment with a useful volume of 350 liters or more. Do not forget about the dimensions, the size of the camera directly affects the dimensions of the case.
4. Defrosting and freezing type . We will not go into details, but highlight only the most important information for you. Freezing can be thermoelectric (silent), absorption (noisiest) and with the help of compressors (highest noise). In turn, defrosting can be Manual (as before, disconnect the equipment from the network, wait for the cameras to defrost, then wash the walls and wipe them dry), Drip (drain moisture into the pan on the back wall) and No Frost (knowledge of frost). Most often, all customers find it difficult to decide which refrigerator is best for their home – with drip defrosting or frost.If you do not defrost the device often, we recommend choosing a more modern and reliable No Frost system. In turn, the drip system belongs to the economy class, therefore, the equipment will cost less.
5. 
6. Climate category . The choice depends on the operating conditions of the unit, as well as the temperature in the area where you are located. The most popular climate categories are shown in the table below. You need to determine the appropriate temperature range for your particular conditions.
7. Energy class . If you want to choose an economical refrigerator for home, pay attention to its energy class. The lowest category (i.e. economical) is A +++. In addition, alphabetically and by the number of pluses are units with higher power consumption (A ++, A +, A, B, etc.).
8. Jobs . You should understand that the more versatile the refrigerator is, the more you will have to pay for it. We recommend that you select the least complex device for your summer residence. But in an apartment or house, you can already spend money on a model that has, in addition to standard functions (for example, temperature settings), an open door indicator, a superfreezer, an ice maker, long-term storage of products, rapid cooling and freezing of products, protection Of bacteria, etc.
9. Compressor type . In 2017, it is already better to choose a refrigerator with an inverter compressor, it is more economical, quiet and durable as well. The only thing that the inverter is afraid of is power surges. Therefore, you will also need to protect the equipment, installing a voltage stabilizer at home.
10. Number of compressors . In inexpensive refrigerators there is one compressor, better models have 2 compressors, which are better because they are cheaper in terms of repair, more economical and also allow you to turn off one chamber (for washing or something else), while the second will work.
11. Control method . Electromechanical control is more reliable and cheaper. Electronic allows you to set the temperature regime more accurately, so it is better in terms of comfort of using the equipment. Most modern models are equipped with electronic control.
12. Noise level . One of the most important parameters as almost everyone wants to choose a refrigerator that is silent and, at the same time, inexpensive, but of high quality. In this regard, our recommendation as an expert is to choose equipment with a noise level of less than 40 dB. With this indicator, the device will operate in quiet mode.

These are all tips on choosing the appropriate technical specifications for refrigerators. Below we will consider the little things that you should pay attention to before purchasing.

What else are you looking for?

So, in order to choose a good unit for the home, we recommend that you consider the following nuances:

1. Shelves must be made of glass. The transparent glass allows you to quickly find the right products in the refrigerator.
2. The seals around the perimeter of the door should be flexible and fit well when closed. Before choosing the option you like, make sure that there is no damage, otherwise you will face a problem like the refrigerator runs constantly and does not stop.
3. Your new fridge and freezer shouldn’t stink of cheap plastic. An unpleasant odor indicates low quality plastic, and therefore the dubious reliability of the manufacturer.
4. Door-mounted handles save a little space. This is especially true if you want to install a refrigerator in a small kitchen.
5. Many models, especially those from Liebherr, have the option of hanging the doors on the other side. It is very convenient, especially when moving around the house.
6. Make sure the legs are on casters (they should be at least 2). This design option will make it easier to move equipment from one place to another, simply by tilting the case.
7. Built-in models are well suited if you do not want to spoil the interior of the kitchen.
8. There are many color schemes for refrigerators.You can always choose the right design to match the kitchen. In addition, there are designer models that will become the highlight of the interior.

Top manufacturers

If you do not know which brand of refrigerator is the most reliable and durable, we recommend that you consider purchasing products from one of the following companies:

1. Samsung
2. Liebherr
3. Indesit
4. LG
5. Bush
6. Pico
7. mustache
8. Hotpoint-Ariston
9. Gorenje
10. Discount

Among the domestic brands involved in the production of household refrigerators, I would advise the Russian company  Biryusa  , as well as the Belarusian  Atlant . If you want to choose an inexpensive but good refrigeration unit for the home, pay attention to these brands. In addition, Atlant in the Russian market accounts for more than 20% of sales, which is a leading indicator.

Evaluation forms

Well, we end our tips with the list of the best models. Several ratings will be provided, which will allow you to choose an option for your own circumstances, so to speak.

The best single-chamber refrigerators for home:

1. Discount KS 50 HW
2. Hansa FM050.4
3. Lieber Tsell 1414
4. Supra TRF-030

They are all small and also cost up to 20,000 (or even 15,000). Choosing a one-room model is suitable for summer residence or office.

Of the two-room units, I would advise for home use:

1. LibreCog 3311
2. Bosch KGN39SB10
3. LG GA-B489 TGRF
4. Samsung RB-30 J3000WW
5. Gorenje NRK 6191 MC
6. Indesit DF 4160 W
7. ATLANT MXM 2835-08
8. Discount KSI 17875 CNF

That’s all I wanted to tell you about how to choose a durable refrigerator and brand. We hope that the expert tips and videos provided will be useful to you!