Supplies of electrical materials and products

Electrical materials are basically the parts or elements used in making any electrical construction project.

This can vary from a small household circuit to as large as a large industrial plant.

Jezli Refineries provides a large inventory of electrical construction products and materials including:

Installation of electrical pipe and conduit

Electrical conduit and pipe installation
Electrical conduit is a pipe that carries an electrical wire for power or communications.

The channel is made of stainless steel. The lighter steel is called IMC or intermediate channel; EMT or thin wall channel; PVC or plastic; Aluminium;

Or PVC coated; It is solid covered with a 40 mil PVC cover. Electrical ducts in sizes from 3/8″ to 6″.

Electrical wires and cables

Electrical wires and cables
Electrical wires are drawn from metal, copper, or aluminum that conduct electricity through an electrical circuit.

The wire can be passed above or below ground, through conduit, bent or open.

The wire is protected by design with a jacket depending on use.

It can also be flexible such as using extension cords.

Its volume can be as small as 26 gauge to 2000 million cubic metres.

Explosion-proof containers

Explosion Proof Enclosures
Explosion proof is the design of a product to contain an electrical short so that it does not ignite a dangerous atmosphere causing an explosion.

Refineries, gas stations, and paint booths are examples of places where you will use these products.

They are heavy-duty steel or aluminum by design, or can be fiberglass as well.

Cutters

Breakers
Circuit breakers are devices that automatically interrupt the continuity of electrical current to protect against a short or overload.

Circuit breakers are manufactured by many manufacturers including

Cutler Hammer / Westinghouse و General Electric و Square D و ITE Sieonans و Federal Pacific.

Circuit breakers protect the smallest household circuit to the largest industrial demands.

Electrical connectors

Electrical Connectors
An electrical conductor is a part that joins or adapts to another part.

Conductor size ranges from 3/8 to 6. They can be internal, external, corrosion-protected, or explosion-proof.

Electrical box

Electrical Box
An electrical box is an enclosure used for many purposes such as pulling, conducting, or terminating an electrical circuit.

The electrical box can be screw or internally adjusted; It can be rain tight, or outdoors.

They can be made of steel, aluminium, plastic, stainless steel or cast iron.

The requirement could include a corrosive material that is protected or explosion-proof.

Lugs

Lucs
Lucs are the electrical conductors that terminate an electrical circuit. Lugs are made of brass, aluminum or bronze.

They are made for the smallest wire size, from 26 to the largest 2000 mcm.

Lugs can be mechanical or set screw; pressing, crimping, welding or welding; Or clamp type.

T& B, Burndy, Penn Union, Panduit, and 3M are some of the different manufacturers of lugs.

There are three basic types of lugs:
01
Normal type
It is used for general purposes in non-electrical substations. Welded where installation properties are not required. They are available in different pad widths to fit most brace sizes.

02
With Sight
This is used as a general purpose terminal and allows inspection of cable insertion depth and solder flux. The advantage of the sight slot is that it does not create a weak spot under severe vibration.

03
Connectors
These are seamless connectors for wire size No. 8 to 4/0AWG and are also available in flared or beveled barrels. a>

Mechanical Lugs
Mechanical lugs are available with screws or four screws.

They are usually ring-shaped and usually made of high-quality electrolytic copper or aluminum.

It is suitable for large wires and cables and is available in three types:

Regular type, vision slot type (which is similar to regular types but with a larger opening) and connector type.

Mechanical lugs are suitable for copper lightning protection and where there may be a lot of vibration.

They are also designed to be resistant to wear and corrosion.

EX Burndy mechanical lugs act as connectors made of aluminum or copper.

They can be single hole, double hole, or stacked with bolts.

Compression Lugs
Compression lugs are a bolt-type input power connection generally made of highly conductive copper or aluminum.

It may have one or two holes in order to provide an automatic connection, and it also comes with a tin-plated electrical plate to reduce corrosion.

The different types of Blackburn compression lugs available are single hole, two holes, and a special compression hole.

The short cylindrical lug has only one hole compression handle, which is typically used for toggle switches and engine controllers.

It is mainly preferred for telecommunication equipment and devices, welding equipment, and power distribution equipment.

Grounding lugs are heavy-duty lugs used for wiring on transformers or steel structures.

They have a threaded screw that fits all types of transformers and provides high clamping force, preventing the wire from pulling on the grounding lugs.

These are generally made of bronze material and connect the grounding conductor to the grounding electrode. It is useful for assembling a grounding assembly with a built-in cable handle.

Single grounding handle is suitable for grounding line devices or switchgear of transmission structure.

They are the most important part of solar PV systems.

While compression lugs and grounding lugs are suitable for small-sized connections, mechanical lugs support large electrical connections.

The mechanical lugs are much larger than other lugs, while people who like to tinker with mechanical mounts themselves will prefer them.

Mechanical lugs are also used in automobiles,

While grounding lugs for indoor and outdoor applications are preferred over flexible, liquid-tight metal tubing when copper or aluminum fittings are required.

Different types of lugs provide different conductors and some can conduct electricity much better than others, regardless of the material used (copper or aluminum).

Choosing the correct lugs can help prevent fire or electrocution incidents.

Motor control

Motor Control
A motor control is a device used to regulate a motor or mechanism.

It can control the smallest mechanism of the largest electric turbine.

There are several manufacturers of motor controllers including Allen Bradley, Square D, and Cutler Hammer

و ITE Siemens و General Electric و Westinghouse.

How to connect Electrical circuit breakers Home

We are pleased that you visit our social media pages, where we publish exclusive offers on our website.

Our Facebook page Here.

Our Twitter account Here.