How to cut house glass is a very serious matter, especially if something goes wrong.

In the event of such an accident, there will of course be material and non-material losses that a person can suffer.

You definitely wouldn’t want something like that to happen, right?

Therefore, there are several steps that must be paid attention to so that the glass cutting process can be done correctly and safely without having to call the handyman.

Let’s take a look at 5 ways below to safely and properly cut home glass.

5 correct ways to cut glass

1. Processing equipment and materials

The first thing you need to do to make glass cutting go smoothly is to prepare your equipment and materials.

Some of the tools and materials you have to prepare start with a grinder, grinder, glass polishing edge, cutting grinding wheels, wooden mats, gloves, oil or oil and glasses.

Yes, for your safety and security during the glass grinder cutting process, do not forget to use gloves and goggles.

Both devices can protect your hands and eyes from pieces that can attack your body.

If all the equipment is ready, let’s start the glass cutting process.

2. Apply the oil to the part of the glass you want to cut

Next, you need to smear the part of the glass that you want to cut with oil, oil or diesel.

The goal is for the part of the glass you want to cut to be easier to separate and for smoother, neater results.

3. Cut the glass with the right tools

Take a wooden base and place a piece of glass or something made of glass on it.

This wooden base is useful so that the glass cutting process goes smoothly and safely and does not feel slippery.

Then take the grinder with the cutting edge.

Now it’s time to start the cutting process.

You have to put the glass in the most appropriate position.

Try to find a good cutting angle so that the cut can be done in one attempt.

In this way, the results will be better.

4. Be careful and do it carefully

You have to remember that grinders are very sharp and can cause problems if the cut goes wrong.

For this reason, glass cutting must be done carefully and slowly.

Cut the glass as desired until you get the desired result.

If there are still doubts about the angle of the cut, feel free to delay this process. Find the most suitable angle again by playing with your imagination.

If you are sure, the cutting process can be resumed.

5. Smooth sharp glass surface

Although how to cut glass is completed step by step, it doesn’t quite stop here.

There is still one more step you need to take.

By replacing the cutting edge with a polishing blade, use the grinder on the surface that is still sharp.

This process is useful for smoothing the surface of glass that has just been cut.

When you just finished cutting, the surface of the glass still has a sharp part.

Of course, it’s very dangerous if left that way.

You have to grind it with a grinder.

Do this step carefully and slowly.

Do not rush as the end result may be unsatisfactory and there may still be a sharp surface.

In fact, you also have to do this process frequently to ensure that all parts of the surface are smooth.

Well, these are 5 ways to safely and properly cut home glass that you can follow.