Description

Key start device with screen Enko

Manufacturer: ENKO

Generator control units and terminal units

ENKO has over 30 years of experience designing generator controllers and terminal units.

Today, our Gen-Set products cater to a wide range of generator sets from small KVA to high KVA and can provide economical, advanced and customized solutions.

Automatic Mains Fault Units – AMF Series

The AMF units continuously monitor the values ​​being measured on the main line and when any values ​​are outside the limits set by the user, the AMF automatically starts the generator, transfers the load between the alternator and alternator, checks the engine condition and provides full protection.

More advanced models are capable of engine maintenance by automatically performing scheduled test runs, can be remotely monitored/controlled and provide many other functions.

Versatile controller for single or multiple generator/mainstream applications

Product Description :

• Intuitive user interface with analog bar graph displays
• The AMF4.0 control module includes two analog bar graph displays to indicate direct readings from the engine temperature and oil pressure gauges.
• AMF4.0 provides flexible load power control, fed from mains and alternator bus bars.
• ENKO’s AMF4.0 Automatic Mains Failure (AMF) controller provides flexible management of load functions and diesel generators.
• MCB and GCB relays can be efficiently controlled, allowing minimum load break, using master/gen-set applications.
• The console provides 5 digital displays to monitor system values.
• All voltages and currents are measured as True RMS values, with an accuracy of greater than 1%.
• All three phase mains and generator side voltages as well as load phase currents are measured.
• This allows optimal control of load supply for safe operation.
• The illuminated simulated pictogram allows for easy monitoring and control of functions on the front panel.
• All system parameters can be configured through an extensive menu.
• All I/O ports can be configured and tuned to suit desired application characteristics and all analog metering inputs can be calibrated, using the system menu.
• Preset temperature and pressure gauge properties can also be selected directly from the menu.
• The controller also includes a “remote start” input so it can be connected to other control systems.
• Remote start properties can also be set through the system menu.

Provides flexible start and control functions for diesel generators

The MSU4.0 control panel provides comprehensive starting and control functions for gensets, as no mains control is required.

• MSU4.0 Auto/Manual Start Control Module is designed for single generators, where mains line monitoring is not required.
• The unit contains all the functions needed to safely start a diesel engine and control engine parameters, while monitoring generator voltage and load current.
• All voltage and current values ​​are monitored in True RMS values ​​and displayed on the panel.
• No additional panel counters are required.
• Load strength is also measured and displayed. The user can run functions on these values.
• The unit also provides all the necessary protection and monitoring of engine values.
• Engine temperature and oil pressure are also displayed on analog bar graph displays, thus eliminating the use of additional on-board gauges.
• The preheat function can be used for safe starting under extremely cold conditions.
• DC battery voltage is measured and displayed.
• The alarm function can also be triggered, depending on the battery supply voltage.
• All alarms are logged and the last 10 alarms can be seen in the previous log records.
• The unit can be controlled remotely by the remote start input function, thus allowing the generator set to be controlled by other systems.
• Engine operating hours are recorded in the system memory.
• Load strength is also measured and monitored and special functions can be activated on these measured values.
• The user can also program the periodic service time of the motor.
• The unit has configurable I/O ports which can be programmed according to the user’s application.
• Analog metering input calibration can be performed from the menu.
• There is no need to open the unit container.
• Five digital displays allow most critical values ​​to be displayed simultaneously, allowing for easy monitoring from the front panel.

↑ Product Features:-

• Offers economical solutions for single Gen-Set applications
• Complete control and protection of the diesel engine and generator
• Single display for voltage and frequency
• Configurable auxiliary inputs and outputs
• True RMS measurements ensure accuracy
• Autorun and test modes
• Digital calibrators for measuring inputs
• Small housing for space saving applications
• Single phase TrueRMS generator voltage measurement
• Preheat function before ignition

↑ Key benefits

• Automatic or manual transfer of load between mains and generators
• The unit’s menu is two-stage password protected, allowing the user and experienced technician to access the appropriate portions of the menu
• Easily obtain information about generator status and view/edit parameters by sending and receiving SMS messages via mobile phone

Features of the product:-

• The device is protected
• The information appears on the screen
• Adopting high quality fireproof and high temperature resistant materials.
• Quality assurance, stable and reliable, long service life.
• The rotation rate of the current transformer and the rotation rate of the voltage transformer can be changed
• The specified information can be recorded in a fixed area with a timestamp
• In poorly lit environments, it also features a backlight to create the optimal reading area
• Flame retardant materials
• High temperature resistance and flame retardant plastic
• Super protection:
• It is made of very safe materials, so it is environmentally friendly
• Provides flexibility and ease of installation

Product benefits

• Combines simplicity of installation, flexibility and durability.
• Meets the requirements of the majority of industrial applications.
• Simple structure, easy to install, easy and convenient to choose
• They provide a solution for industrial applications that require high resistance to chemical agents.
• The classic shape features a simple look and modern feel to reflect your personality.
• The strong and durable surface gives you many years of dependable service.
• Made of high quality thermoplastic material, smooth surface, flame retardant, flexible and durable, can withstand tough impacts and heavy force, long service life.

We are pleased to have you visit our pages on social networking sites, where we publish exclusive offers on our website.

Our Facebook page  here .

Our Twitter account  here .