Description

silicone gun

silicone gun

Hand gun silicone sealant gun

Product Description :-

• thick hexagon
• Solid lock, stronger driving force
• Thickened push discs, the push does not slip
•  The glue is not easy to bend, high hardness.
• 360 degree rotating design
• The grip can be 360 ​​degrees free rotation direction
• Flexible and convenient use
• easy to use .
• Hollow body design, reduce operating fatigue.

The pressure volume is stable, and the silicone flow is easy to control, and it can save the amount of glass glue.

Product Description

• For use with silicone cartridges, sealant

Suitable for silicone tube

Comfortable and fatigue-free operation even during extended periods of use or in cold environments.

STRONGER AND MOST STABLE CONSTRUCTION – The high-quality steel and aluminum alloy construction of the silicone gun ensures perfect handling and long durability, even under extreme conditions.

WIDE RANGE OF APPLICATION – The caulking gun is suitable for cartridges up to 1/10 gallon in size.

So it can be used to work with all common adhesives and sealants cartridges

Product characteristics:

• fat weapon
• thick hexagon
• push stronger
• Payment does not slip
• The glue is not easy to bend
• High hardness
• 360 degree rotating design
• Flexible and comfortable use
• It can be easily placed in the corners of the wall
• Hollow body design
• Reduces operating stress
• The pressure is stable
• And it is easy to control the flow of silicone
• Long life

Usage instructions:

• Pull the plunger back by pressing with your thumb and pulling the plunger back
• Feed the cartridge nozzle through the hole in the end of the gun so that the cartridge fits into the ring
• Press the trigger and repeat until the plunger enters the recess in the rear of the cartridge
• A spring-loaded trigger is used to feed the piston down the gun and depress the cartridge, thus forcing the sealant through the nozzle
• To release pressure, simply apply pressure with your thumb and pull back on the plunger

Use a silicone gun

Pull out the plunger valve

This is represented by the long metal snap on the back

Insert the silicone tube into the gun

Insert it at an angle from the base first, then push it up into the hexagon

Adjust the trigger to match the tube size.

to do that! You will be able to hold the silicone mounting site firmly in place after this.

Prepare the surface you want to seal.

• Ensure that the surface is free of impurities
• Dip a sponge in soapy water and wipe the surface.
• Rinse the sponge and use it again to wipe the area.
• Dry the area with a towel.
• Make sure to remove the water as any moisture can cause problems

Cut an opening from the silicone tube to use it at an angle of 45 degrees

Press the trigger evenly and firmly

Leave the silicone on the surface:

Applications :-

• Suitable for all crafts and home use
• Use silicone and gun as you want to use them

silicone gun

For more products and exclusive special offers, please subscribe to our pages on social networking sites.

To view our Facebook page, click  here .

To view our Twitter page, click  here .