Having previously discussed about the steps of cutting glass in general, now it is time for us to know how to know how to cut glass with nails which is easy for beginners.

Perhaps this method will seem a little strange and unreasonable.

Because glass has strong properties, but it is easy to break due to its hard material.

While on the other hand, nails are a common thing that gets attached to hard parts of a home such as walls.

But really you can cut glass with just a nail, you know!

Let’s take a look at the steps and how to cut glass with nails easy for beginners.

How to cut glass with nails for beginners

1. Prepare tools and materials

How to cut glass with nails The first thing you need to do is prepare the tools and materials.

Some of the tools and materials to prepare are nails, glass, lubricants, and pen-type glass cutters and  glass cutters .

After preparing the above equipment and materials, you can proceed to the next process.

2. Prepare the cutting process mat

One of the things that should not be forgotten in the process of cutting glass is the cutting mat.

This will make it easier for you to chop later.

The rug you can use can be a large table or a flat surface plate.

Next, carefully place the glass or glass so that it does not break.

You can use other materials such as carpet or something similar as a substitute for the mattress.

3. Use lubricants

After everything is ready, you need to lubricate the glass with lubricant.

Several types of oil or liquids that you can use are kerosene, diesel, or others.

This is to facilitate the cutting process so that it can be neater as desired.

4. Calculate the required glass volume

Then, having smeared the glass with lubricating oil, you need to measure it as you wish.

You can use thread to make sure the cut line is straight.

Then prepare the tweezers  so  that it does not break or damage at the time of splitting.

5. Glass screw cutting process

Finally, after performing the above steps, you can now perform the glass cutting process.

Carefully split the glass, and ensure that the glass has been smeared with lubricating oil before cutting, so as to avoid messy glass breakage.

To avoid the skewed and messy splitting process, gently shake the tongs until the glass shatters.

This way, you will get a piece of glass that is straight and does not deviate from the pre-marked line.

6. Trim the cuts if they are below the max

If the cutting results are not perfect, you can arrange the results again.

You can also lubricate the part of the glass that you want to arrange with oil to make the cutting process easier.

When you are done, you can save the cut in a safe place and continue the glass cutting process again.

good luck!

Well, these are the steps and how to cut glass with nails which are easy for beginners to apply at home.

If you feel unsure, you can consult a more knowledgeable and experienced person.

We hope the above article added insight and was useful to you!