How to install LED bulbs for homes

The first step in installing LED lighting is to determine the place where you want to place it, as many people prefer to place such lighting in kitchens, in addition to more wonderful places such as behind panels and frames as a type of modern decoration that reflects some of the calm and beautiful colors in the place, and these steps As follows:

• Find a place to put the LED light source that is the most practical and ideal.
• Drill as many holes as you need to pass the wires (assuming you decide to put the power supply in a kitchen cabinet).
• Then find the circuit you are using for the LEDs, and turn off that circuit.
• Get the electrical wire from your circuit box and insert it where the electrical source is.
• Next, connect the LED lighting to the wire from the source.
• Connect the ground wires from the source to the LEDs.
• Then turn on the circuit and test the illumination.

Tips when buying LED bulbs

• It is preferable to seek the help of specialists in this field when installing them to replace the ultra-light bulbs with energy-saving LED bulbs available in the market in the best way to install lamps for homes.
• But before you buy any of those bulbs you’ve been eyeing, give yourself this guide and read it to see if you can use LEDs in any lighting fixtures in your home.
• The first thing you should consider is installing the bulb base, the two most common bulb bases are the E27 screw type or the GU10 screw type, both are available in LED bulbs and the bulb may be decorative and visible in the fixtures, so your replacement LED bulb should be attractive to look at . Because it is considered the nerve in aesthetic lighting.
• Additionally, it is essential to know if you have the correct wattage while changing bulbs. When purchasing replacement bulbs for your traditional fixtures, remember that the wattage of LED bulbs does not have to be the same as your old bulbs.
• They can use 5-watt LED bulbs, while halogens only consume 30 watts of energy to shine as bright as a traditional 60-watt bulb. Likewise, an 18-watt halogen bulb produces about 220 lumens, while an 18-watt bulb produces more than 1,300 lumens. You can also read the differences between a halogen and an LED bulb to find out which one will serve you best, and the best way to install LED bulbs for homes.

Frequently asked questions: How to install LED bulbs for homes

There are many common questions that concern many citizens about LED lamps, and the most prominent of these questions and their answers are the following:

Can you install LED bulbs for homes with incandescent bulbs?

• LEDs can be used in conjunction with ultra-bright bulbs in multi-socket indoor fixtures but beware as they will compromise your LED; Because other bulbs raise the ambient temperature inside the unit.
• If your LED is of good quality, it may malfunction due to an unexpected overheating for which it was not designed, and the one thing that many people do that you might consider is to buy LEDs to install one, one at a time and replace them gradually.
• But I must warn you against doing this, because it is better to change all the bulbs at the same time, because this way you will greatly risk reducing the life of your LEDs, and having a mix of LEDs with other bulbs is not a good idea, the heat of incandescent bulbs will destroy the chips. Electronics inside the LED bulb and causing it to malfunction.
• High incandescent bulbs consume more power than LEDs when on the same circuit in the unit, and the LED will receive less power, so these bulbs are among the best energy saving bulbs. It is best to use all LEDs in one fixture from the same manufacturer, so they are rated For similar working conditions using single fittings.

Do LED lights need special fixtures?

• There could be a couple of reasons why you may not be able to put LEDs in any old fixtures, if one of your existing fixtures has a dimming feature and the new LEDs are not compatible, you will have a dimmability issue as well.

How to determine if a fixture is suitable for LED lights

• Any well-ventilated device allows good heat dissipation and is open on all sides, so it is a good tool for an LED, so if you buy a closed type LED that has a large aluminum heat sink that dissipates heat very quickly, you can now easily use the existing one. In your current closed matches.
• All you need is a power supply, a way to cut round holes, 14-2 through B cable, basic power tools and a drill, a transformer box that converts 120 volts to low voltage, and a UL listed abbreviation as a junction box with space for a power input and shutdown.
• It also allows you to take power from the first box and arrange as many lights together as you like, but apart from that, installation is very easy, many companies make a similar product so please check the manufacturer’s watermark for it to be of high quality.

Are LED lights dangerous?

• The AMA says that lifetime exposure of the retina and lens to blue peaks from LED lights can increase the risk of developing cataracts; Studies reveal that the light emitted from LED lamps can cause changes in the retina even if there is high exposure even for a short period of time, so the best way to install LED bulbs for homes is by specialists in this field to avoid risks.

Many people are looking for a way to install LED bulbs for homes, to use them in adding many places inside the house in order to give an attractive touch to the place in general, and they are widely used in events held in homes, decorating trees, walls, and swimming pools, in addition to using them to decorate rooms. Sleeping on special occasions.