Description

Module 4Pole [Vigi C60 NHL]

• Product: circuit breakers
• Manufacturer: Schneider Electric
• Scope: Acti9
• Device short name: Vigi iC60
• Description of poles: 4p
• the color is white
• [at] rated current: 63 a
• Earth leakage sensitivity: 30 mA
• Earth leakage protection time delay: instantaneous
• Earth leakage protection class: Class A
• Network type: AC
• Network frequency: 50/60 Hz
• [Ue] Rated operating voltage: 400 V AC 50/60 Hz conforming to EN 61009-1400 / 415 V AC 50/60 Hz conforming to IEC 61009-1
• Standards: EN 61009-1IEC 61009-1

Benefits of
absolute safety Ground leakage protection in downstream distribution
Greater service continuity with VisiTrip
Greater electrical immunity with Type Si (Super Immunity)
Easy selection with meaningful part numbers
Easy installation with robust terminal connections
Environmentally friendly 100% recyclable and recoverable materials .
Protection applications
in all industrial and commercial buildings from:

Electrocution according to IEC 60364 installation standard and national standards
Fire hazard due to current leakage of building materials

Features
The simplicity of combining the Vigi iC60 DIN Rail Additional RCD Modules with iC60 MCBs makes them extremely easy to install.

Class 2 Isolation: Continuing safety for unqualified operators and employees.
VISI-TRIP: Quickly detects external faults and reduces intervention time.
Completely immune protection against ground leakage: better service continuity, especially with the new Si type (super-immune) in contaminated environments and networks.
Electrically and mechanically connected to iC60 Miniature Circuit Breakers (MCBs),
Nominal Current: 25 to 63 A
Si (ultra-immunity), AC, types,
30 mA Sensitivity: Additional protection against direct contact (according to IEC 60364)
Sensitivities 100mA, 300mA, and 500mA and 1000mA: additional protection against fire and indirect contact (according to IEC 60364)
Type Si (superimmunity): protection of sensitive circuits (computing equipment) and those subject to disturbances (lighting fixtures with electronic ballast, power electronics)
Selective triggering: to ensure correct discrimination between various residual current devices (RCDs) and tripping of the device closest to fault
Comply with IEC EN 61009-1 approved by national official authorities
DIN rail iC60 miniature circuit breaker (MCB) retains the same characteristics when combined with a residual current device Additional Vigi iC60 DIN (RCD)

Connections – Terminals: Negative side of tunnel-type 1 cable(s) 1 … 35 mm² rigid without terminal cable terminal of tunnel-type bottom side 1 cable(s) 1 … 25 mm² flexible without cable terminal negative terminal of type Tunnel 1 cable(s) 1 … 25 mm² flexible with cable end
Wire Stripping Length: 14 mm (bottom)
Tightening Torque: 3.5 Nm (bottom)
Product Compatibility: Single End

Range Compatibility: Acti 9 iC60Acti 9 Reflex iC60, Device Location, In System: Outgoer, Overvoltage Protection: No Residual Current Disconnect Technology: Independent Voltage
[Ui] Rated Isolation Voltage: 500 VAC 50/60 Hz Conforming to IEC 60947 -2
[Uimp] Rated impulse withstand voltage: 6 kV Conforming to IEC 60947-2 Local signals: trip indicator Mounting mode: clip-on Mounting bracket: DIN rail Electrical connection
to MCB: by bolts
Busbar comb Distribution block compatibility: lowest

More information
Context:
The Acti 9 Reflex iC60 DIN Rail Integrated Control Circuit Breaker provides absolute safety and enhanced service continuity with:

VisiSafe for completely safe operations and maintenance on circuits.
Class 2 Isolation: Permanent safety for unqualified operators and employees.
VisiTrip for rapid detection of external faults and reduction of intervention times.
Direct interface with PLC thanks to integrated electrical accessories for maximum compatibility with Building Management Systems (BMS).
Integrated locking facility provides maximum security for maintenance operations.
Additional residual current devices (RCDs) of the Acti 9 range, completely immune to interference: enhanced continuity of service, particularly in polluted networks and environments.
Integrated remote control with three modes of operation for maximum flexibility and upgradeability of electrical installations.

Technical information
Current rating: 10, 16, 25, 40 and 63 A
Break-off capacity: 10 kA for the Reflex iC60 N version and 15 kA for the Reflex iC60 H version
Starting curves: b, c, d
Compliance with IEC/EN 60947-2, Approved by official national bodies
Full coordination with Acti 9 range RCDs and Compact NSX MCCBs
Insulation suitability in accordance with industrial standard IEC / EN 60947 Voltage rating
: up to 400V, insulation voltage: 500V
Additional residual current devices (optional): Vigi iC60 and Quick Vigi
Integrated Auxiliary Devices: Status and Playback (OF and SD) Free Potential Contacts
Accessories (Optional): DC 24/48 VAC Power Adapter

Module 4Pole [Vigi C60 NHL]

Shipping