How to connect SPD in a single-phase and three-phase network?
How to connect SPD in a single-phase and three-phase network? Good and long-term operation of household appliances and electronics directly depends on the quality of the energy consumed. The current values of voltage and current in electrical networks for one reason or…
How to connect SPD in a single-phase and three-phase network?
- Installation rules and features
- Contact options
Installation rules and features
The installation of overvoltage protection devices is regulated by the Electrical Installation Rules (PUE), which is the main regulatory document in the safe maintenance of electrical installations. In accordance with the requirements of the PUE, overvoltage protective devices must be installed in facilities with a provided lightning protection system, as well as in houses where electricity is supplied via overhead lines in areas with an annual duration of lightning periods of 25 hours.
The need to connect SPD in facilities in areas where thunderstorms do not occur is advisory in nature, however, given the devastating consequences of a direct lightning strike, it is recommended to take all necessary measures to protect against this type of elements, even in non-hazardous areas.
Surge protection for industrial and office buildings, residential buildings is included in the scope of activities of electrical organizations. Installation and connection of SPD in a private house or apartment falls on the shoulders of the owner, therefore, every homeowner, at least in general terms, needs to know the basic rules for arranging surge protection, as well as how to install and how to connect the necessary equipment for this.
Installation of SPDs must be carried out in accordance with the requirements of technical standards, which provide 3 levels of protection. As the first level of protection, valve arresters are used, belonging to the SPD class 1 category.
They provide protection against direct lightning effects on power lines and are installed in ASUs (input distribution devices). Additional protection against lightning strikes and switching operations in step-down transformer substations is provided by class 2 protection devices, which are installed and connected in the switchboards of a house or apartment .
To protect sensitive electronics and electrical engineering even to minor micro-surges, class 3 surge protection devices are used, which are plugged into the consumer’s power panel in its immediate vicinity.
How to install equipment in order to provide three-stage surge protection is shown in the diagram:
Easier explanation:
Contact options
One of the most important issues is how to connect the SPD into the shield. Almost all connection options are identical and indicated in the product data sheet. Installation methods for protective devices may differ, depending on where they are installed, in a single-phase or three-phase network, also depending on the grounding systems.
The grounding system is the most modern and meets all TN-S safety requirements where zero (N) and protective zero (PE) wires in the entire power supply system operate separately. The system tn-cs represents a combined version, in which N and PE from the power supply to the ASU of the house are combined into one wire, after which the separation of the neutral and protective conductor begins.
It must be remembered that this circuit will not work without grounding, so it is necessary to equip it. Tn-c system The simplest and most common grounding system in obsolete housing stock, in which one wire (PEN) plays the role of a neutral and working conductor.
The diagram below shows how to connect a Class II SPD in a single-phase network installed in the panel of an apartment or a private house with two grounding options. For this connection option, it is necessary to select the simplest monoblock protective device, with the corresponding operating voltage.
Connection diagram with grounding system TN-C:
If a tn-s grounding system is provided, in this case, installation and connection of an SPD consisting of two modules, the design of which provides for separate terminals, for connecting the phase, zero working and protective wires, marked correspondingly, will be required.
The SPD connection in a three-phase network is implemented as shown in the photo:
When installing an SPD, it is necessary to provide means of protecting the network in the event of a short circuit in the device and its connection through the device or through a fuse. The device can be installed before and after the meter, in the second case, the meter will remain unprotected from overvoltage.
If you have any inquiry, please contact us freely and we will be happy to serve you.
Jezli website for purchasing electrical appliances
When we say Jeezly website, we are talking about one of the most famous Arab websites that was able, in a very short period of time, to achieve a very large demand for purchases from it by people from various parts and sectors of the Arab world.
On the Jeezly website, you will find a joint look and all the products that you may need in your home, starting with those for kitchens or bathrooms, but even those for gardens, you will find them on this wonderful site.
So, if you were lost before and did not know where to go to buy your products on the Internet, now you have the perfect solution, and all you have to do is go to the Jezli website and start choosing the products you want.
What are the features of Jeezly ?
Since we are talking about a site that is preferred by many people around the world, there is no doubt that it is a site full of various features and characteristics. Therefore, we have decided to devote our next paragraph to pointing out the most prominent features of the Jezli site.
One of the most prominent features of the site is the proportionality of prices. On the Jeezly website, you do not have to worry about the imaginary prices of the products, as is the case with most sites that display their products on the Internet.
The price of delivering products is very reasonable and not expensive, and the site accepts delivery to various countries, without forgetting that it accepts free shipping on some products.
One of the features of the site is also the high quality of its products, as it is impossible to find a poor quality product. Rather, the Jezli website deals with the major companies, Philips, for example, and other famous brands, so you must remove from your mind the idea of the poor quality of one of the products. Another advantage of the site is that it does not specialize in one type of product, but rather you will find various types of products on it, for example, electrical appliances, hand tools, mechanical devices, paints, packages for establishing apartments, and many other types.
Jeezly website also accepts what is known as the shopping cart, which makes it easy for you to filter the products you want to buy and put them in one package in order to be able to pay with the click of a single button.
Accepts multiple payment methods.
We are pleased that you visit our social media pages, where we publish exclusive offers on our website.
Our Facebook page is here .
Our Twitter account is here .
