Description

Crouse Hinds flashlight against explosion

• PFM LED: lamp type
• Power: 85 Watt
• Voltage: 347-480V AC 50/60Hz
• Driver type: non-dimmable
• Nima Dist: 7 x 6
• Cover: aluminum
• Finish: cold white epoxy powder coated
• Lumens: 13100
• Range: -40° to +65°C
• HxWxD Cover: HxWxD: 12 x 15.5 x 7 inches.
• EPA: 1.50 square feet
• CRI: 70-CRI
• Color temperature: 5000K

Crouse-Hinds Series Champ FMVA LED Floodlights are designed to provide full spectrum, clear, white light in Class I and Class II hazardous areas. Eleven versions of Champ FMVA are available, ranging from 3,000 to 50,000 lumens, providing a reliable, long-life solution for a wide range of floodlighting applications.

Champ FMVA LED Floodlights are approved for use in NEC, CEC and IEC hazardous locations, providing a single solution for applications worldwide.

These spotlights are ideal for exterior wall and pillar-mounted public area lighting, where flammable vapors, gases, flammable dust, fibers or volatile matter are present.

Champ FMVA LED Hazardous Area Floodlights

Design Features

Globally approved for use in designated hazardous areas

Eleven models from 3000 to 50000 lumens for a wide range of floodlighting applications

Provides a lifespan of up to 60,000 hours at 55°C – eliminating the need for frequent bulb replacement

The die-cast aluminum heat sink increases surface areas and improves airflow, improving both LED and driver life.

Energy-saving technology – up to 72% energy savings compared to HID fixtures

T3C Minimum Temperature Rating – Work safely in the most hazardous environments and any non-hazardous location

Shock and vibration resistant solid state LEDs do not contain filaments or glass components that can break – greatly reducing the risk of early failure

EASY INSTALLATION – Coupler design for mounting on the Crouse-Hinds SFA6 Series Slider and SWB6 Wall Mount System

Cool white (5000K, 70 CRI) and warm white (3000K, 80 CRI)

Instant lighting and tuning

Cool operation / no warm-up required

Serviceable drivers

Does not contain mercury or other hazardous substances

Operating ambient -40°C to 65°C (NEC only; IEC: -40°C to 55°C)

Standard material

Lamp housing and adapter – die-cast aluminum with corrosion-free epoxy powder coat

Lens – Heat and Shock Resistant Glass (Standard)

Gaskets – silicone and neoprene

Outdoor hardware – stainless steel

Explosion Proof Lighting

We are pleased to have you visit our pages on social networking sites, where we publish exclusive offers and discounts on our website.

our page on Facebook HERE.

Our Twitter account HERE.