piercing connector for cable

Description

piercing connector for cable

• Usage/Application: AB cable accessories
• Number of pins: 2
• Material: thermoplastic
• Pin Type: Hex Nut
• Size: 16-95, 35-150, 35-95
• black color
• Configuration: self-seaming frame, waterproof and anti-corrosion
• Power rating: 6KV AC Voltage for 1 minute

product specification

ABC pinhole connector for connection of building branch insulated cable distribution system, low-voltage insulated cable, low-voltage insulated cable in household connected expenses, street distribution system, ordinary cable branch site, underground power cable, garden lawn lighting line connection and so on.
Use/Application: AB Cable Accessories
Number of Pins: 2
Material: Thermoplastic
Pin Type: Hex Nut
Size/Dimension: 1.5-25mm2 
Color: Black
Configuration: Self-Seaming Frame, Waterproof and Anti-Corrosion
Power Rating: 6KV AC Voltage for 1 Packaging
type: box,
branch section: 1.5-10mm2

Product Description:
For insulated overhead distribution lines.
concurrent isolation operations on the live line or the dead line; Abstraction is not required.
Reliable connections are ensured by shear-controlled torque.
Insert the main cable into the open side.
Insert the cable tap on the side of the end cap.
Tighten the connector until the shear breaks.
The connection has been established.

Cable Connector
1.1 The hole connector, simple installation, do not need to take off the cable coat.  
1.2 Momentary nut, the hole pressure is stable, keep good electrical contact, and do not damage the lead  
1.3 Self-seaming frame, waterproof, waterproof, corrosion resistant, extend the using life of the lead and insulated conductor  
1.4 Adopt ìng-specific connection disc, applicable to Cu joint (Al) and Cu(Al) or Cu and Al  
1.5 small electrical conduction resistance, conduction resistance is less than 1.1 tìmes of branch conductor resistance of the same length
1.6 special insulated can body, additional light resistance and environmental aging, insulation strength can reach 12 k 1.7V  
arc surface design, applicable to the same diameter (various) connection, wide connection range (0.75mm2-400mm2)

Hand tools and accessories